Program Map for Aviation Maintenance Technology Certificate
Aviation Maintenance Technicians (AMTs), also known as aircraft mechanics, are responsible for keeping aircraft in airworthy condition. They perform regularly scheduled inspections and maintenance, as required by the Federal Aviation Administration (FAA). Avionics Technicians or Aircraft Electronic Technicians (AETs) are AMTs with advanced avionics training and certification.
Besides routine maintenance and inspections, work for Technicians involves repairs, replacement of parts, use of precision tools, troubleshooting for problems and testing of equipment following repairs to ensure that work has been done properly and within prescribed safety limits.
The commercial airlines or smaller facilities require technicians to work on many types of aircraft and perform all phases of the maintenance process. In other larger facilities, technicians may specialize in preventative maintenance and in specific parts of the maintenance process.
Technicians are FAA certified requiring hands-on training as well as classroom hours in appropriate programs. Avionics Bench Technicians (Bench Techs) only perform avionics manufacture, troubleshooting, and repair of components and do not require FAA certification.
Though there is high demand for AMTs, industry indicates the highest demand for employees is the AET.
EvCC’s Aviation Maintenance Technology program has been operating on Paine Field in Everett, Washington for 50 years and is an FAA Part 147 operating under Air Agency Certificate EU9T125R. It provides education and training necessary to qualify for the FAA AMT Certificate with Airframe and Powerplant (A & P) ratings. The curriculum meets or exceeds the minimum number of hours required by 14 CFR Part 147.
The Aviation Maintenance Technician School (AMTS) is eight quarters, including Summer Quarters, and the Advanced Avionics program is two quarters. Courses in the AMTS provide experience in reciprocating and turbine engines, airframe repair, maintenance, and inspection procedures. Courses in the Advanced Avionics program provide experience with electronics, wiring, fiber optics, aircraft avionics systems, and FCC license preparation.
Note: In order to work as an aviation maintenance technician, students must possess a Federal Aviation Administration (FAA) Mechanic certificate with Airframe and/or Powerplant ratings. This certificate (license) is granted to students who complete the 14 Code of Federal Regulations (CFR) Part 147 program and pass the FAA written and practical & oral exams for each rating.
Faculty advisors for the Aviation Maintenance Technology Certificate are listed below. If you have been assigned an advisor please work with them, otherwise you can choose any of the advisors below.
Dale Lerback dlerback@everettcc.edu
Kenneth Andreason kandreason@everettcc.edu
Shay Mohn smohn@everettcc.edu
Steven Tuggle stuggle@everettcc.edu
CHECKLISTS
- Aviation Maintenance Technology AAS-T Checklist
- Aviation Maintenance Technology ATA Checklist
- Aviation Maintenance Technology Certificate
- Pre-College to College English and Math Checklist
Notes on using this map:
* indicates an elective course that is recommended but not required and could be substituted with another appropriate course. For example, ENGL& 102* on a map means that ENGL& 102* is recommended, but any 5-credit course from the Basic Communication Skills list on the DTA would also be acceptable.
→ indicates a pre-requisite relationship. For example, MATH&141→ MATH&142 on a map indicates that a student must pass MATH& 141 before taking MATH& 142
(F, W, Sp, Su) indicates the quarters in which a course is offered, if not offered every quarter. For example, ART 116 (W) means that ART 116 is only offered during Winter quarters
TS stands for Transitional Studies. Courses taken through the Transitional Studies department do not qualify for financial aid but cost only $25 per quarter. To see if you qualify, contact the Advising Center at advising@everettcc.edu or 425-388-9339.
& as part of a course number (e.g. ACCT& 202) indicates that the course is part of the Common Course Numbering System
D as part of a course number (e.g. ENGL& 102D) indicates that the course fulfills the Diversity Course requirement for the AAS-DTA degree
This icon is used for course requirements.
The learning objectives of this course are the foundation of future courses in this pathway. Success in critical courses positions you to be successful in later courses in this pathway.
This icon is used for mandatory or recommended actions related to advising.
Before you can take your college-level courses, you may need to complete prerequisites.
Attend an AMTS Information Session
Schedule an Aviation entry advising appointment by calling 425-388-9533 or emailing aviation@everettcc.edu. This appointment will take place at the Paine Field Aviation Facility.
See your advisor for self-paced or accelerated alternatives in Math and English to prepare for college-level classes. Want to move further faster? Learn about EvCC's I-BEST classes.
Prepare for college-level math
To start the AMT (Aircraft Maintenance Technician) Courses, you must be eligible for MATH 86 - Essentials of Intermediate Algebra. If your math placement is below MATH 86, you’ll need to take the following sequence of courses, starting from the level you placed into:
- TS 60 → TS 70 → MATH/TS 76 → MATH/TS 86
Prepare for college-level English
To start the AMT courses, you must be eligible for ENGL 098 - Introduction to college writing. If your English placement is below ENGL 98, you’ll need to take the following sequence of courses, starting from the level you placed into:
- ENGL/TS/AEP 97 → ENGL/TS/AEP 98
Note: English language learners may need additional courses before ENGL/TS 97 depending on their placement.
Completion of AMTS Orientation
Before registering each quarter, check your Degree Planner to see what classes you should take to stay on track. See your faculty program advisor with any questions you have.
Recommended Actions
- Looking for more support by phone, tablet, or computer? Visit the Online Student Resource and Support page.
- Do you qualify for Financial Aid? Fill out a FAFSA or WASFA and visit the Financial Aid Office to begin talking about how to pay for college.
- Visit the Tutoring Center, Writing Center, and the Library
- Consider registering for a study skills class offered by DEVED department.
- Get involved with Student LIFE and join a campus club, such as EvCC Aviation Maintenance
- See if you qualify for TRiO and/or MESA.
Complete general courses.
GENERAL QUARTER 1
- AMT& 101 - Basic Electricity
- AMT 102 - Basic Electricity 2: Practical Applications
- AMT& 111 - Math and Physics
- AMT& 141 - Aircraft Drawings
-
AMT& 161 - Materials & Processes
GENERAL QUARTER 2
- AMT 105 - Human Factors
- AMT 180 - Fundamentals of Troubleshooting
- AMT& 121 - Weight & Balance
- AMT& 131 - Corrosion Control/Fluid Lines
- AMT& 151 - Ground Operations & Servicing
-
AMT& 171 - Federal Aviation Regulations (FAR’s)
GENERAL COURSE FINAL TEST
- Must pass to receive FAA Course Completion Certificate
- Required to take FAA General Written Test
Recommended Actions
Check back in with your faculty program advisor to discuss if this is the right program for you and update your plan of study as needed.
- If you haven’t already, join a club that aligns with your interest, such as EvCC Aviation Maintenance Club
Complete powerplant courses.
POWERPLANT QUARTER 1
- AMT& 251 - Reciprocating Engines I
- AMT& 252 - Reciprocating Engines II
- AMT& 271 - Engine Ignition & Starting Systems
- AMT& 275 - Lubrication Systems: Reciprocating Engines
POWERPLANT QUARTER 2
- AMT& 253 - Turbine Engines I
- AMT& 254 - Turbine Engines II
- AMT& 261 - Engine Instruments
- AMT& 265 - Engine Fire Protection
- AMT& 267 - Engine Electrical
- AMT 276 - Lubrication Systems: Turbine Engines
POWERPLANT QUARTER 3
- AMT& 257 - Engine Inspection
- AMT& 279 - Engine Fuel Systems
- AMT& 281 - Engine Induction & Cooling
- AMT& 285 - Propellers & Fans
POWERPLANT COURSE FINAL TEST
- Must pass to receive FAA Course Completion Certificate
- Required to take FAA Powerplant Written Test
Recommended Actions
Check back in with your faculty program advisor to discuss career opportunities.
- Schedule your FAA Written Test for General and Powerplant
- Schedule your General and Powerplant Oral and Practical Exams with an FAA Designated Mechanic Examiner
- Meet with a program advisor to make sure all degree/certificate requirements are met.
Complete airframe courses.
AIRFRAME QUARTER 1
- AMT& 205 - Wood, Covers and Finishes
- AMT& 215 - Assembly & Rigging (with Helicopters)
- AMT& 235 - Navigation Communications Systems
- AMT& 237 - Airframe Fuel Systems
AIRFRAME QUARTER 2
- AMT& 201 - Composites
- AMT& 211 - Sheet Metal
- AMT& 231 - Ice & Rain Control Systems
- AMT& 239 - Aircraft Electrical
AIRFRAME QUARTER 3
- AMT& 207 - Welding
- AMT& 221 - Airframe Inspection
- AMT& 223 - Landing Gear/Hydraulics
- AMT& 241 - Aircraft Instrument Systems
- AMT& 245 - Cabin Environment
AIRFRAME COURSE FINAL TEST
- Must pass to receive FAA Course Completion Certificate
Apply for graduation at least one quarter in advance.
Recommended Actions
Meet with your faculty program advisor to make sure all degree/certificate requirements are met.
- Schedule your FAA Written Test for Airframe
- Schedule your Airframe Oral and Practical Exam with an FAA Designated Mechanic Examine